Hi Todd,

Nice to speek with you.

I know the hard work you make and
the attention you put in each board.

That’ s why I’m a fan of your label.

I also know it’s difficult to run a surfboard factory actually especially with the crisis we have.

I’ve been ordering boards from you the last 3 years and love all of them.

I must also said you have made  some of my all times favorite (Rascal).

My 2 new boards are in Paris actually and I should have them to my doorstep Monday or Tuesday.
I will let you know my feedback  and I will send you a picture of me and my perfect Proctor quiver.

I’m also thinking of a new order for 2009 and would like your advice and suggestions about this:

- Proxy Quad Fang 6′0 / 21 / 2 1/2

- Proxy Stingerless carbon rail quad fin  for medium surf (greased pig?groveler IV sw?) 6′3 / 19 1/2 or around/ 2 1/2

-Titanium upgrade 1 or 2 all around thruster for good wave conditions (Groveler IV p? Blackbird? SR 71? Ante up?) 6′6 / 19 1/2 or under / 2 1/2

Best,

Vincent

Charissa and Todd,

Just got back from the Mentawis … surf was pumpin

surfed everywhere from burgerworld to playgrounds down to maccas… board went unreal
geez, it has traveled some miles in the last month,

has not got one ding or dent in it,

check out www. tengirri.com got photos and video of me surfing
the board.
Cheers,

Nigel,  Australia
Proxy Epoxy construction with Titanium Series Upgrade
Option 1.0: Kevlar Compression Patch &
Option 2.0: Carbon-Hinged Flex Tail

Greased Pig: 6′2 x19 1/2 x 21/2 swallow tail

Charissa,

Sorry I have not had a chance to give you any feed back on the the new board.

Let Todd know that board just goes off!

He was spot on about the Greased Pig being the right board.

I have been riding it in everything out here

from waist high mush balls to head high barrels and it handles it all.

As always thanks for the magic board!

Chris Laffitte, Japan
Custom Proxy Epoxy construction: Greased Pig single wing swallow tail
5′8″ x 18 1/2″ x 2 3/16″

Charissa board arrived o.k. no damage…

absolutely stoked with it.

First custom board ever that came out the way I wanted it to.

U guys should be marketing ur boards over here… Thanks heaps!

Customer service is second to none

will let u know how it go’s.Taking it to the mentawis next week.

Regards, Nigel        Australia
Proxy Epoxy construction with Titanium Series Upgrade
Option 1.0: Kevlar Compression Patch &
Option 2.0: Carbon-Hinged Flex Tail

Greased Pig: 6′2 x19 1/2 x 21/2 swallow tail

…

Surfed the board at Beacon (13th Beach) ….went great!

raised a few eyebrows with the technology involved in the production of it.
Thanks again.
Nigel

Hey Todd the greased pig I got - the titatanium series,
surfed it in solid six foot waves at 13th beach today.
seems the bigger the waves with more push the better it goes.
I’m stoked.

It has raised some eyebrows, surf has pumped for 6 weeks here.

Nigel

Todd and Charissa,

Well this email is horribly late but I blame that solely on the board you made me.  The lime green 5′9″ x 19″ 7/8 x 2″ 3/4 Rascal II you built for me is in a word…. “insane”.  I have literally ridden it for 4 weeks straight every single day of the week and am continually impressed with how it performs.

It has turned around what would normally be a boring surf sessions in gutless surf into killer sessions.

The board just kind of lifts up underneath your feet giving you a gliding/ skimming feeling that I have not experienced before.

My surfing has never looked or felt better and I can’t thank you enough for that!

I know that this board is reported as a “small wave / gutless surf” board, but I have to say

it is one of the most versatile boards
I have ever ridden.

With the 5 fin setup, I can make adjustments for when faces start jacking up to give the board more bite into the wave (It ripped right through pumping head high to HH+ waves).  The waves have gotten quite a bit bigger the last two days and I moved back to my standard shortboard……

I lasted for all of 4 rides before I pulled the Rascal II out again.

That would be my only complaint about this board,

I want to ride it in everything!!

I will definitely be calling upon you in the future for another board.

Thanks again to both of you!  Todd for making the board I always wanted and Charissa for being hands down the coolest person to do business with.

Regards,
Matthew Glaspey (customer for life), San Diego, CA
Custom Surfboard: Proxy Epoxy construction: Rascal II
5′8″ x 19 7/8″ x 2 3/8″ moontail
4 parabolic channels, FCS 5 fin install, GAM with GX rears for quad or thruster setup

Hi Todd/Charissa,

The board was delivered on my doorstep on Wednesday. Amazingly there was also a clean chest high swell running at one of my favorite breaks!

I’m very lucky to get a new board and use it the same day in inconsistent Bermuda.

The board paddles amazingly well and gets into the waves nice and early and charges fast with the nose eagerly passing through the sections.

It rides exceedingly well on the faces and is very loose rail to rail.

It has done everything Todd said it would do for me and I’m really looking forward to getting it out in the looming hurricane swells!

Please thank Todd for exceeding my expectations

and providing a custom service with the upmost integrity!

Have a great weekend.

Andrew Scott, Bermuda
Custom Surfboard: Proxy Epoxy construction: Lil’ Rascal
6′6″ x 21″ x 2 3/4″ swallow tail

Hey Todd:

Been awhile since I picked up the boards, but I wanted to let you know that they both work unreal.

I have never had boards that are so light and responsive as this. Especially like the Pig and have surfed it in head high waves.

Been on that board alot. Waiting for a little more juice to get the Accelerator going, but so far I am totally satisfied. I think you dialed in exactly what I needed in both boards and it feels like my surfing has gone to the next level. The rest of my boards are just collecting dust right now!

And thanks for the personal service. Best custom service I have had.

You have a great operation and I like that fact that you treat everyone with equal respect and attention. I will be coming back for more, if these Proxy’s ever give out!

Off to Costa Rica next month and will send you some photos. Wanted to check to make sure there
are no issues with the Proxy’s when traveling or in the heat. Let me know if they require any special
care.

Best to you and Charissa.

Richard Stoner, Venice, CA

Custom Proxy Epoxy Greased Pig
5′10″ x 19 1/4″ x 2 5/16″ single wing swallow tail

Custom Proxy Epoxy Accelerator [Parabolic]
6′0″ x 18 7/8″ x 2 1/4″ rounded squash tail

“No ego trip or hype, finally a shaper who cares… Three words to describe
Todd Proctor would be innovation, determination and communication.”

Hey Todd,

Board works Unreal! Turn to Turn it is the fastest board Ive ever had.
I can do a quickest round houses I think ever!

Insane: Rail to Rail, Light, Quick, Responsiveness.
Fast fast fast, Turns on a Dime.
Overall:

I think overall the board is insane! Best epoxy I’ve every ridden.

Optimal waves would be glassy Malibu 2-3 feet …

Greg Strugach, 34, San Diego, CA
lethal goofyfoot standout at any spot
6′2″ x 18 1/2″ x 2 5/16″ SR71
Custom “PROXY” 5′11″ x 18 1/4″ x 2 5/16″ Small Wave Destroyer

surfboard review: custom performance short board surfboards

Hello charissa, hello Todd!

I’m letting you know that I got the new board this week. Package was top notch and the board arrived in 1 piece.
For your future customers I sincerely think that you
should warn them about your surfboards.

I missed almost 2 days of work since I received mine.

It rides so good it’s just not sane…

I’ve never had a board so responsive, nervous and fun to ride. Ever get the feeling to just scream after landing a trick because it feels sooo good?
Well this is how I feel just about every 2 minutes spent in the water. My boss sent someone to pick me up at my favorite spot today to take me out of the water, I’m forced to work now.

I could not be more pleased!

Guillaume Gingras, 31, Quebec, Canada
Custom Proctor Epoxy “PROXY” Surfboard: 6’2” x 18 ¾” x 2 ¼”
Greased Pig

surfboard review: custom pig, groveler, swallow tail small waves boards

Holy Shakas Todd! The Rascal II is absolutely insane. I’ve surfed it
nonstop since picking it up from you, and I’m loving it.

This is not just a small wave board; it’s an all around awesome board for

everything from knee high dribblers to head high peelers.

No need to grab the shortboard for the average good days.

The Rascal II is so manueverable, fast, and

responsive, I don’t want to ever put it back

in the board bag. Everyone should get one.

Thanks for the magic board.

Ben D.
Custom Surfboard: Proxy Epoxy construction: Rascal II, modern round nose fish
5′6″ x 19 3/8″ x 2 1/4″ moontail

Hey Todd,

The Lil Rascal is insane! After picking it up at your shop

I surfed ankle-to-knee C-Street, and that thing just zoomed, just like the video on your site.

Never thought a big guy like me (6′2″ 185) could get speed like that on such weak little waves. Last month I took it (and the 6′5″ D.Y.L.) down to El Salvador for the last South of the fall. I rode the 6′5″ until the swell started to drop, then had three of the funnest days riding the Rascal on a waist high reef, having the time of my life flying down the line and ducking into little coverups while the rest of my bros just complained about the small surf;-)

The Rascal is truly a magic board.

I can feel that “bubble pillow” thing with the concaves.

One little pump and it just lifts and goes! So stoked on it!

I’m on the North Shore now for the rest of the month. My biggest problem has been reaching for the Rascal when the conditions call for a bigger board, but that thing is so fast, as long as I make the drop I can speed down the line!!!

Here are some pics from yesterday.

Thanks for making me a great board and Merry Christmas!

Jon Watschke, 33, Manhattan Beach, CA
Proxy custom Epoxy 6′0″ x 20 1/4″ x 2 1/2″ Lil’ Rascal Round Nose Fish
5 fin setup: MRTX Natural Glass Flex Quad & MRTX Twin with Trailer

To the Proctors,

thank you for a unreal lil’ rascal. Got the board mid morning and unpacked it and found pro packing was used,no damage.

Surf was 3-5ft point break weak windswell and board was making sections and carving in ways that I could not believe.

You can feel the concaves working right off the bat and thickness to the advantage of speed and flow.

I will be ordering another one very soon.

Cheers, Chris Stanger
Custom Proctor Lil’ Rascal: 5′9″ x 19 5/8″ x 2 /38″

Visit the Lil’ Rascal in the Proctor Board Shop

Todd and Charissa,

…Don’t know what to say…the Twin Fang, Lil Rascal and the board you made for my 8 year old daughter Samantha came out absolutely amazing!

The art work, craftsmanship and attention to detail was incredible.

I can’t thank you enough…I don’t even know where to begin. I am so pleased with these boards and I cannot wait to ride them. Samantha sends a HUGE thank you!!!! She said this was the coolest birthday present ever!!! Expect pictures soon!!!!

Mahalo,

Ronnie and Samantha Santaniello

Hey Charissa,

I am writing this in regards to my 5′ 6″ Lil’ Rascal custom board. The board is insane and is now my go to board for anything h/h and under (even though I will ride it in bigger clean surf). Todd’s dimensions for me were right on and the epoxy is better than any of my XTR boards. Even the boards grey color is a nice change and I can NOT wait to get on a Blackbird or SR71.

Thanks to Todd for answering every question I had and making sure this board was going to be magic.

And to you Charissa for your superb customer service and making this process painless and getting my board to my doorstep just as promised. I am stoked.

Sincerely,

Christian B., 37, Los Angeles, Ca
Custom “PROXY” Epoxy: 5′6″ x 19 1/2″ x 2 5/16″ Lil’ Rascal

the rascal is holding up well and has been riding really great,
absolutely love that board,

honestly the best shape for me in smaller conditions I’ve ever owned!

It’s great to be able to do fast short board maneuvers in the small stuff. Before the rascal I could barely surf in the small conditions without a log.

Thanks Todd, great design!

Be blessed

- Kip K, 25, North Carolina
“PROXY” 6′3″ x 21 1/4″ x 2 7/8″ Lil’ Rascal, MR-TFX FCS Natural Glass Flex fins

Todd,

The Lil’ Rascal is a blast! My wife said she’s never seen
me surf better than I am on my Lil’ Rascal.
It’s the best board I’ve ever used.

If you want to improve on what you’re doing in the water, I recommend it!

Most importantly thought, it is freaking fast!
Another Proctor…..
Lil’ Rascal quad works very nicely!

Mark St. Johns, 44, Oxnard, CA
5′6″ x 19 1/2″ x 2 1/4″ Lil’ Rascal

surfboard review: custom round nose fish surfboards

Hello Charissa and Todd,

I just got back from Panama. Thanks for the update. I can’t believe the board’s almost ready. That was quick. I can’t wait to try it out.

P.S. The Rascal was a blast in Panama, rode it everday for 2 weeks as the swell never got over head high. Lovin’ it.

Thanks again,

Jameson Bergen, 31, Conneticut
Custom Proctor Epoxy “PROXY” Surfboard: 5′5″ x 19 1/2″ x 2 5/16″ Lil’ Rascal Round Nose Fish

Todd and Charissa,

The boards made it all in one piece! They look amazing! I can’t wait to ride it!!!! Thank you both so much for all the attention and patience!!!!!

The Twin Fang is absolutely beautiful! It is exactly how I imagined it..only better in real life! It is the perfect size and width. The red and yellow is amazing!! I am so happy to have you both as family and I am very excited to see the next piece of art. This Twin Fang is a fantastic addition to an already beautiful quiver.
God bless you both and stay well.

Ronnie Santaniello- Yokosuka, Japan
Twin Fang 6′6″ 22″x 2 7/8

Todd and Charissa,

OK, I got the board out yesterday and it paddled like a longboard and smoked down the line like a jet!

It took me by surprise the first 5 or 6 rides because after 15 years of longboarding I never knew something can move that smooth and that fast…I was stoked! This board also had a lot of Japanese surfers asking who the shaper was and when this is coming to Japan! I guess first impressions are everything. Just to bad I don’t surf any where as great as Jay Phillips!!!!!! But after a few seasons on this Twin Fang…who knows! Thanks again Proctor family! You both are the BEST!

Ronnie Santaniello- Yokosuka, Japan
Twin Fang 6′6″ 22″x 2 7/8

Hi guys,

I finally got the Quad out and it was RAD!

I couldn’t believe how light and fast it was! It turns on a dime too!

The Twin Fang was a really good training tool because the transition was really, really easy! First day out and it was 6ft and FUN!

Thanks! I love it. I am never going back to longboarding ever again!

Mahalo,

Ronnie
PROXY 6′6″ x 11 3/4″ x 19 5/8″ x 14 3/4″ x 2 5/8″
Four Leaf Clover Quad Fin

surfboard review: custom twin fin retro fish surfboards

Todd & Charissa,

Our boards got here yesterday. I was really stoked when I saw mine and couldn’t wait to get it wet. The timing couldn’t have been any better either. All last week was flat and today a pretty good bump came in. We had about a four hour clean head high session. The board performed just as I imagined,

it felt as if it were an extension of body.

I came in and I’m resting now. The afternoon should be a little onshore and about chest. I think I’ll give it a run as a twin. I haven’t retired the long but I don’t it’ll be seeing action for a while.

Muchos Thanks,

Andrew Durham
6′8″ x 22″ x 2 7/8″ Single Fang Retro Single-Fin Diamond Tail

surfboard review: custom single fin retro surfboards

Todd

Sorry it took so long to write about your boards that you shaped for me before Christmas. I just returned from a 3 week trip down in Morocco and was finally able to put them thru their paces that they deserved. So…

proctor surfboards round nose fish, lil’ rascal
6′1″ x 20 1/2″ x 2 5/8″ Lil’ Rascal

Surfed in head high mushy point surf and what a blast!!!

She was such a skatey, slippery little board that after a couple of waves just worked like a dream. Lot of speed off the bottom, loose anywhere on the wave and a great laugh. All who saw her were very impressed with the shape and fin system. Great choice

surfboard review: custom round nose fish surfboards

proctor surfboards shortboards, groveler iv.p
6′6″ x 19 5/8″ x 2 9/16″ Groveler IV.p Rounded Squash Tail

My work horse. Surfed this from shoulder high to solid 6-7′ points. Was a great board in the beefier waves. Pushed back when I needed it out on the shoulder for cutties,

paddled like a dream, very fast around sections and held suprisingly well in the hollow stuff.

At my first impression upon opening, she seemed pretty over built and to be honest she is for a lot of occassions. A lot of thickness everywhere. I asked you for an all around board and you did a good job. Next time will probably go a little smaller in size and thickness. Overall, was very pleased with the board, again, another good choice.

surfboard review: custom groveler shortboards, all around performance

proctor surfboards guns, ante up
7′0″ x 19 1/2″ x 2 5/8″ Ante Up Roundpin

Surfed in 7′-10′ Anchor Point. Now this board was such an amazing ride. Paddleing out on that big day with new board I was a little concerned. But as soon as I made it out the back a wave popped up just in front of me. And from the the paddle in to the finish, I just shat myself!!!! Paddled in soooo easy and early and once to my feet was no kidding and I hate the expression, ‘like a magic carpet ride.’ The board had so much speed and control, glided around sections easily, turning off the bottom was always controlable, was unlike any board I had ever ridden.

For the next 2 hours I had one of the best sessions of my life on that board

and can only wait to ride it once again.

As for the office side of your buisness, I found Charissa very helpful and pleasant. Her side was as good as the boards you made me.

I have to say that when I find myself back in Cali and I need a new board I will definetly be giving you a call for my next shape.

Cheers Todd and Charissa
Matt Panighetti, 31, Morroco

surfboard review: custom gun surfboards, roundpin

Hey Todd:

Been awhile since I picked up the boards, but I wanted to let you know that

they both work unreal.

I have never had boards that are so light and responsive as this. Especially like the Pig and have
surfed it in head high waves. Been on that board alot. Waiting for a little more juice to get the
Accelerator going, but so far I am totally satisfied.

I think you dialed in exactly what I needed in both boards and it feels like my surfing has gone to the next level.

The rest of my boards are just collecting dust right now!

And thanks for the personal service. Best custom service I have had. You have a great operation
and

I like that fact that you treat everyone with equal respect and attention.

I will be coming back for more, if these Proxy’s ever give out!

Off to Costa Rica next month and will send you some photos.

Best to you and Charissa. Richard, Venice Beach, CA

Proxy epoxy Greased Pig: 5′10″ x 19 1/4″ x 2 5/16″ single wing swallow tail
Proxy epoxy Accelerator [Parabolic]: 6′0″ x 18 7/8″ x 2 1/4″ rounded squash tail

Todd and Charissa Proctor,

I got the board that was shaped for me last Wednesday. It looks great, and it arrived on time and unharmed. Of course I couldn’t wait for a 2 foot mushy summer day to take it out, so the following Saturday when a shoulder high swell rolled in I gave it a first spin. To sum things up, the board rips.

It’s fast down the line, feels just right rail to rail, and catches everything!

I think anyone considering a fish for their quiver should seriously consider the lil’ rascal. The conditions were hollow early on and the

board practically paddled itself into waves.

Later in the day the winds turned onshore, and even when the waves got mushy the board performed at the same level. I was really impressed.
I also wanted to let you know that I really enjoyed working with both of you. The entire process was really smooth and easy and I would not hesitate to come to Proctor Surfboards again for another magical board. Shouldn’t be long until i’m looking for a new performance board!
Take care,
Joseph Zitarelli, 19, Pennsylvania
5′8″ x 19 3/4″ x 2 3/8″ Proxy custom epoxy Lil’ Rascal
Future Fins, Vector II FT1 w/ trailer

Visit the Lil’ Rascal on the Proctor Surfboards Worldwide Custom website and see the movies….

Well just to let you know, I have been surfing for 25 years , not a beginner for sure. I know when a board works even before it touches the water. At first I was a little skeptical about the new technology and I was watching the board all the time wondering if that thing was going to work…, man you got it ,
if the surfboards are going to change that’s the way.

This is what I’ve been looking for 25 years -

responsive, light, super strong and the best is - it’s the fastest board I have ever ridden….

I got to surf it in big and small conditions and works in all kinds of surf. It’s worth the extra $ really.
Well just so you know, I am not looking back. You got another customer.
Thanks man and God bless you.

Jordy Sanchez, 30, Cancun, Mexico
6′1″ x 20 1/4″ x 2 1/2″ Module Proctor Custom Epoxy “PROXY”

surfboard review: custom small waves grovelers, epoxy surfboards

Hey Todd,
Mark St. Johns here. Just surfed Zuma for about 3 ½ hours on my Le Vee. Is it Levee or Le Vee? Anyway, that thing is freaking sick man. It was probably knee-high to waist-high with a few chest-high sets. Kinda mushy, occasionally a decent wave came in.

That board just generates its own speed, I’m tellin’ ya, I love it.

Oh by the way, Dale Rhodes text messaged me this morning. I guess he surfed PDS on his new board, he loves it. You are gettin’ some props my man. Proctor! Yes! Talk to ya later buddy, bye.

Mark St. Johns, 43, Woodland Hills, CA
5′10″ x 19 1/4″ x 2 5/16″ LeVee(Greased Pig) Swallow Tail Stinger

surfboard review: custom small waves surfboards, swallow tail

Hi Todd,

Thank you for the info.
The Levee is doing great. It took me sometimes to get used to it, I don’t know if it’s because of the quad fins set up but

i didn’t like the board at the beginning. But now i love it,

in the small waves the board is very fast and responsive but I use it also in bigger waves like overhead and the board is great. Right now it’s my daily board.
Thanks for the good job.
See you,

Nicolas Faure, 35, Pacific Palisades, CA
6′1″ x 19 3/8″ x 2 3/8″ LeVee(Greased Pig) Quad Fin

surfboard review: custom small waves quad surfboards, swallow tail

The Lil’ Rascal new round nose fish you shaped me is amazing, by far the best small to tiny wave board I have ever ridden.

The thing flies through knee high mush and holds its speed allowing me to blow up little sections.

It has increased the amount of days I can surf by a lot - making summer in Goleta a lot easier to stomach. I was also stoked to see it in art work ideas section. Needless to say my heart sank a little last week when I broke the nose in waist high shore break, no worries though I get it back from the ding repair this week and I be back out on it. I also plan on ordering another one when this one needs to be retired. Thanks again Todd for taking the time to get the right board figured out with me, this board is definitely a hit.

Ross Wood, 22, Goleta, CA
5′6″ x 19 1/2″ x 2 1/4″ Round Nose Fish

surfboard review: custom round nose fish surfboards

Hey Todd,

The Lil’ Rascal you shaped me is a blast! I’m amazed at how it blows through small sections of literally no wave.

Perfect for flat Ventura/Rincon days.

Never thought I could surf a board so short. But it’s just perfect and much more sophisticated than I anticipated.

Nancy Masters, Ventura, CA
6′1″ x 20 1/2″ x 2 5/8″ Lil’ Rascal Round Nose Fish

surfboard review: custom round nose fish surfboards

Hey,

Surfed the new Proxy 6’0” Twin Fang and it was incredible! Actually it was more than incredible!

This board is so, super light and lively.

I out-paddled the longboarders and ripped the small sections up with ease. Todd definitely made another masterpiece and yes as you all have been saying…”A magic board”!

I really don’t know what more to say…this is my fourth Proctor board and each time I am left amazed.

Mahalo, Ronnie Santaniello 32 years old- Yokosuka, Japan
Twin Fang Epoxy (Proxy) 6’0” 21”x2 5/8”

Charissa-Todd,

Okay, I can finally give you a report on how my Lil Rascal worked out for me. It was INSANE!!

I spent two days in Izu surfing a pre-typhoon swell and the Lil Rascal was bananas!

It tore up the inside sections and handled the big sets with total ease.

The only thing that bothered me about the board was PUTTING IT AWAY!

Thanks again for another sweet board!

Mahalo,

Ronnie Santaniello- 32 years old
Yokosuka, Japan

Hi!
I want to thank Todd again for the Rascal. It has been perfect for me in this mostly always Texas wind blown chop. This last Saturday the local surf forecast said there was no rideable surf but the Rascal showed them that there was rideable surf. The below email sure helped my ego too.

[.....Hey Jim ....you are my inspiration now because you are older than me and you were tearing it up out there. I definitely want to introduce you to my surfing buddy's. You will fit right in with our so called "Over the hill gang". Hopefully we'll have some good waves soon and we can hook up down in Galveston. Don't work too hard, Bobby... ]

Jim Lattis, 50, Katy, TX
7′6″ x 22 1/2″ x 2 3/4″ Lil’ Rascal Round Nose Fish, Custom Proctor Epoxy “PROXY”

…Hi Todd,

On Thursday through Saturday we had thunder storms and very high offshore winds. Then a cold front came through early Saturday evening and by Sunday morning there were clean waist to chest high waves. It was only the second time this winter that the conditions have been as good. I had a great day.

Thanks again for the Rascal. It has truly helped bring back a magical time in my life.

I absolutely love being in the water again….Jim

surfboard review: custom epoxy round nose fish surfboards

See the Lil’ Rascal Movies……

Charissa,

I just wanted to wish you and Todd a happy and successful new year. I love my 5′ 6″ “lil rascal” and have gotten some fun waves here in so cal and in Mexico. I look forward to riding more of your boards in the future.

Sincerely,

Christian Balogh
(Very happy customer)

Hi Charissa,

Everything went smooth and the board is really, really sick. I’ve been out on it a bunch already and am getting used to it and loving it at the same time.

I LOVE the shape and the board turns really well and carries it speed much better than my shortboard in the crappy waves - exactly what I wanted so THANKS -

I’M STOKED!!

Can’t wait to get out again more this week!!!

Best,
Colin, Puerto Rico
custom Proxy epoxy Lil’ Rascal
5′11″ x 20 1/4″ x 2 3/8″, Future FT1 fins

Todd,

I’ve found the board is flying on the quad mode

which is good for when it’s either really small or else ledgy and barreling. You were right though, it doesn’t hook straight up and down like a tri. Used as a tri it is a little slower than the quad, but goes top to bottom easier for good rail to rail surfing. Your flexible epoxy is noticably livelier than the Surftechs and a good deal

lighter, too. I am absolutely stoked on your boardline and can’t wait to work on another couple.
Thanks for everything Todd and Charissa.

Take care and God Bless!

Paul Pence, 38, San Diego, CA
Custom 5′11″ X 18 1/2″ x 2 3/16″ PROXY 5-fin
SF4 QUADS, AM2 Tri

surfboard review: custom epoxy performance shortboards, san diego surf
Custom Quad Fin Surfboards - Detail your Board with the Shaper

Hey Todd,

I hope all is going well and you guys are getting tons of waves from this swell!!

I wanted to give you some feedback on the Blackbird, the best board I have EVER ridden.

This board is everything you said it would be and more. Since picking it up last weekend, I have ridden it at head high Trestles, head high Swami’s and 10-12 foot closed out Mission Beach (for a contest - not by choice). First off, this board is so fast right from the take off, I find myself confidently freefalling into waves five feet behind the peak and zipping right into position. When coming off the top, it releases like no other, actually pushing your lips higher and projecting you through the turns down the line. The tail will bust out insanely at times, especially on the backside, totally breaking free and reengaging for some pretty solid comments from people watching. I found moving the back foot up off the fins helps it go through the high tide mushy spots with no loss of speed and keeps it really manueverable. This may be the board of all boards, if you can think it, you can do it! It truly goes where you want it to. I would recommend it to anyone wanting to take their surfing to the next level! I’ll give you some feedback on the Greased Pig soon, but fortunately the waves haven’t been small enough for it yet! HA!

We had the fourth contest at solid 10 - 12′ Mission Beach yesterday and I had a near drowning incident involving EMT, lifeguards etc. It wasn’t the board, but instead the little string on the leash broke leaving me in a rip tide with no board, a filled wetsuit and a 6 wave set on the head. Despite my near tragedy, the Blackbird made it out of the carnage fine and I still made it to the finals even with the one wave I had in the semis.

I can’t believe the Blackbird sustained no damage - that foam must be kriptonite,

because I took the one that broke my brand new leash right on the back. The whole contest crew was on their feet watching and just in awe that the board didn’t break (not a scratch!). It was one of those scenes where everyone went, ‘Ohhhhhhh!’.

I am thinking of backing it up with an SR71 and maybe an Ante Up / SR71. Here are some thoughts / questions:

1) Would you recommend making any adjustments from the Blackbird to SR71 (length, width, etc) based on the differences between the two boards?
2) Would you recommend decreasing the widepoint of 18.5 if I went up by an inch to 6.1 for the SR71 or can I leave it alone?
3) On the Ante Up, if I get into a Big Rock / Point Mugu situation w/ a lot of water moving and offshores, do I want a PU w/ heavier glass or a Proxy?

Thanks Todd and Charissa for all the support! Check the shots of Braeden practicing his pig dog on the

Greased Pig!

God Bless,

Paul

Hey Todd and Charissa,

I’m stoked you guys got some juice from the last swell. Yeah, I’m alright, but did have to go to the ER for a bacterial infection in my lungs that didn’t crop up for several days.

I was able to paddle out today on the Greased Pig and I’ve got to tell you, you’ve hit another HOMER, man!

You are batting 1000 with my quiver so far, bro. That Greased Pig model just flies in the small stuff and even some sneaker overhead bowls that were making it through. I was getting 4 - 5 hits on waves and flying past sections others had no chance of making. It’s weird, but I feel like I’m looking at the waves a little differently on your boards. I’m feeling way more confident. If you take the high line on the Greased Pig, there aren’t many waves it won’t fly past!

It’s just a really fun board that makes surfing less than ideal waves amazing!

I can’t stop thinking about the SR71 and am thinking of backing up the Blackbird with a couple

.

What do you think of these dimensions?

Board 1

SR71, 6′ 0.5″, 11.25, 18 7/16, 14, 2 3/16 FCS, PROXY, standard squash, safety nose (blunt 1/2″ like you did on the Greased Pig)

Board 2

SR71, 6′1″ , 11.25, 18.5, 14, 2 3/16, FCS, PROXY, rounded squash, safety nose

Let me know on these 2. I’m firing to try them.

Paul

…

Hi Charissa and Todd,

The board made it safe and sound - I got it this afternoon. Wow, every one of your boards looks like it will ride more insane than the last!! I am so glad we went with a little shorter template - this board looks great!!!!

Thanks Todd and Charissa! Have a great Memorial Day weekend.

Paul

Cool, thanks so much!

Oh, and the board words great. On the way back we surfed Rincon at about waist to chest high and

the thing made sections like no one’s business.

Don Moulds, 29, Southern California
Custom Proctor Epoxy “PROXY” Surfboard: 6′0″ x 19 1/8″ x 2 5/16″ Greased Pig Stinger
Lokbox Quad fin

Good morning Kids,

Hope you had a great Easter and were able to relax this weekend?

Thanks for having my board ready

and I simply love it………..It’s my favorite board now…

………….thank goodness,

because I was beating the heck out of my twin fin………

Thanks,
Dale

Custom Surfboard:
Proxy Epoxy construction: Performance Twin 6′0″ x 19″ x 2 1/2″

I tested the board out today at Boneyards just north of Swamis this afternoon.
I really like how it rides.
It definitely has more drive off the bottom than other fish I have had, and can go vertical pretty easy.

Lots of speed coming through turns. I think it will be a great all-round everyday board for me.

The volume, size, concaves, paint job all turned out exactly how I wanted them.

Thanks for the great board!

Chris Oesch, 30, Encinitas, CA
6′4″ x 20 1/2″ x 2 3/4″ Module/Groveler IV.p Proctor Custom Epoxy “PROXY” Series

surfboard review: custom epoxy small waves versatile shortboards,
oceanside surf

TO CUSTOM ORDER A SURFBOARD & DETAIL YOUR BOARD WITH THE SHAPER, CLICK HERE

Todd, here is my feedback on the 6’4” LeVee Flexible Epoxy. By the way, got the extra fin screws from you today. Thank you for excellent customer service.

Todd, took delivery of the 6’4” LeVee and let it cure just as you instructed. Here is my comments.

I found the LeVee to be generally very fast and highly maneuverable. The most satisfying thing I can say about the board is that it is very responsive in the tube or any portion of the wave when it became a steep vertical face. That alone made me very happy, as my ability to stay in the tube is somewhat mediocre at best. Also, getting bounced off the bottom on a bad shoulder makes one generally skittish about getting hammered by the lip. The board paddles acceptably well for such a small board. It catches waves well.

This flexible epoxy construction really seems to work.

I can actually feel the board loading under (flexing) on the bottom turn, and then when it releases the flex, feeling the “spring” spit me out of the turn.

That part is really unique to my experience. Kinda like skiing or snowboarding.

It seems durable under my rough handling. It definitely springs back with energy, which is something I have never dealt with before (will take some getting used to, but that is a good thing!).

This board shape and the construction rates a 10 – 10, 10 being best. Thanks for a great product. I look forward to using the flexible epoxy 7’2” West Peak/Big Chief on my overseas trip this year.

I can only imagine what a really good surfer must be able to do with this shape and this construction. This is a quality product.

God bless, 46, Bert Rivera, El Segundo, CA
6′4″ x 19 7/8″ x 2 5/8″ Levee (Greased Pig) Proctor Custom Epoxy “PROXY” Series
7′2″ x 19 1/2″ x 2 5/8″ Ante-up outline/West Peak Rocker

By the way, I surfed Newport River Jetties yesterday on peaky knee-waist on the 6.4 Proctor LeeVee and my good friend from Hurley was astonished at the speed I was getting on these little waves. I am attaching a couple to give you an idea of what fun I had on your boards.
I am a happy customer, Bert Rivera

surfboard review: custom epoxy small waves grovler shortboard
7′2″ x 19 1/2″ x 2 5/8″ Ante-up outline/West Peak Rocker

BROWSE ONLINE BOARD SHOP FOR ANTE UP SMALL GUNS

Hey you guys…

First shot today on Lil Rascal - more to come for sure.

Truly thanks for all your hard work and unreal boards.

Chris Stanger/ SantaCruz Ca   :::   5′9″ x 19 5/8″ x 2 3/8″ Lil’ Rascal

Hi Charissa,
My Twin Fang arrived yesterday and of course I surfed it yesterday.

The conditions were 2ft. and weak and I had a blast. I was picking off waves I had no shot at with my other boards.

It is going to be a fun summer in Santa Cruz.

My thanks to you and Todd and I will definetly keep Proctor in mind when I add to my quiver in the future.
Thanks,
Steve Craver, Santa Cruz, CA
Twin Fang: 5′9″ x 21″ x 2 1/2″, Glass-on twin fins

Hi Todd,

I haven’t talked to you since I got my EPS “Ridiculous” single fin with side bites (6′4″ x 20″ x 2 5/8″) a year ago October. Thought you should know I’m still loving it. People at “Uppers” (Trestles) continue to comment on it and how well I surf on it.

And my wave count is through the roof.

Anyhow, I’m about ready to make some quiver changes and the “lil Rascal” is sounding a bit tempting. I’ve been riding the “Ridiculous” with a 5 1/2 inch single and the small longboard side fins.

I really like the positive, flowy feeling of the single fin- especially backside because I’m goofy footed.

I have ridden it as a twin and a half and didn’t care much for it. So, here’s the question. Would you recommend the “lil Rascal” with a similar fin set-up? I’m curious because it looks like a board I could surf a bit more radically. The nose, rocker, and outline looks very similar between these two boards, thus the transition would be easy between the two. The “lil Rascal” seems like you’ve trimmed the fat, shortened, and put a more pure twin set-up on it than the “Ridiculous”. Is this the case, and how could it be adapted for a 6′2″ tall, 35 yrs. old weighing 175lbs? I’d love to believe I surf as good as Jay, but…. Would you recommend a 6′ 0″ x 20 x 2 5/8″?” Too big or small?

I’d love for it to paddle similar to my current board (or better if you can work miracles).

As always,

Thanks for your time and attention to detail.

Sincerely,

Mark Quest

6′4″ x 20″ x 2 5/8″ Ridiculous Small Wave Wonder, Single Fin thumbtail/roundpin
custom flexible epoxy surfboard construction

Visit the Lil’ Rascal page and watch the movies

Todd….

the rascal is holding up well and has been riding really great,
absolutely love that board, honestly the best shape for me in smaller
conditions I’ve ever owned!

It’s great to be able to do fast short board maneuvers in the small stuff.

Before the rascal I could barely surf in the
small conditions without a log.

Thanks Todd, great design!

Be blessed

- Kip K, North Carolina
Custom Proctor Epoxy “PROXY” Surfboard: 6′3″ x 21 1/4″ x 2 7/8″ Lil’ Rascal

Hey Charissa,

I am writing this in regards to my 5′ 6″ Lil’ Rascal custom board.

The board is insane and is now my go to board for anything h/h and under (even though I will ride it in bigger clean surf).

Todd’s dimensions for me were right on and the epoxy is better than any of my XTR boards. Even the boards grey color is a nice change and I can NOT wait to get on a Blackbird or SR71. Thanks to Todd for answering every question I had and making sure this board was going to be magic. And to you Charissa for your superb customer service and making this process painless and getting my board to my doorstep just as promised. I am stoked.

Sincerely,

Christian B., Los Angeles, CA
Custom Proctor Epoxy “PROXY” Surfboard: 5′6″ x 19 1/2″ x 2 5/16″ Lil’ Rascal

Todd,
Just want to let you know the small wave board is working great. It was just what I was looking for! I tried it with the twin fins and it was crazy, it was all I could do to keep the board under me. I will try it again once I get my feet back. Only being able to surf 4 times for the past 3 years, it will take me a little to get everything back. I have not tried the other 2 but I know they will work, the last ones were perfect.

Northern Japan actually has some good waves. I have only been able to make it out a few times but it has been chest to head and glassy in the early morning. I have heard this pretty much what to look for all winter with some bigger ones every once in a while. Now I just have to get use to the cold.
The water is about 48 but the air is 30 and both are only getting colder.

I was looking at the site and the new “Ridiculous” board looks insane. I will have work on getting some funds up for that.

Thanks for everything!

Chris Laffitte, Japan
5′9″ x 18 5/8″ x 2 3/8″ Groveler IV.sw Swallow

…Todd,

First I wanted to say how much I am stoked on the boards you made for me.

The small wave groveller is like magic!

I ride it 90% of the time even up to 6-8 foot faces….

surfboard review: custom groveler small waves shortboards, japan surf

Todd/ Charissa

Believe it or not after all this time I just now got to take the New Board out. The Board is truly awesome.

Just as advertized it catches waves easy and in head high surf is a Rocket Ship.

I did purchase a set of VF467 Foil Tech Fins. The board absolutely accelerates thru turns.
Hopefully this weekend I can have some pictures taken and will attach.

Thanks Again,
Franks
Frank Williams, 53, Port St. Lucie, FL
Proctor Custom Epoxy “PROXY” Surfboard: 6′4″ x 19 5/8″ x 2 7/16″ Greased Pig (Levee)

Todd & Charissa,

Hey just wanted to let you know how stoked I am on the boards or should I say board. I have not gotten a good chance to ride the quad but the twinny is insane. I take both boards but always seem to find a reason to pull the fish out instead of the quad. It is everything that I wanted.

My breach break has transformed into a mush point break this summer and the fish just excels in it.

I think I finally pushed it to its limits today with a typhoon swell and solid 8 foot faces. Felt like I was on a

skateboard going up and down the faces. I will let you know how the quad is working if I can ever get off the fish.

Thanks again,

Chris Laffitte, Misawa Air Base, Japan
5′5″ x 19 1/2″ x 2 3/8″ Twinny Fish, Proctor Custom Epoxy “PROXY” Series

surfboard review: custom twin fin fish retro surfboards, epoxy boards
japan surf

VISIT THE TWIN FANG PAGE TO SEE THE TWIN FANG FANGING ITS WAY THROUGH THE LINEUP

Twin Fang Description:

They’re back ’cause they’re fast. This is an updated version of the original “Fish” design. I’ve incorporated a modernized single-to-double concave-to-accelerated spiral vee bottom, and blended it with the original retro outline, rocker, and thickness flow…why? for the enjoyment of hair-raising speed runs. Check out the website to watch streaming video of this twinny fanging its way through the lineup. Also available with quad setup. Graphics: wide open, pictured: resin opaque with cutlap t&b